.
– Industrial PoE Gigabit Injector 802.3at/af up to 30/60W
– IEEE802.3at PoE/PSE 30W(2 pair) or 60W(4 pair)
– Voltage booster design from 12V to 48/54V (12V model)
– DIP switch to select Mode A or B
– Operating Temperature Range from -40°C to 75°C
The Lantech IPOA-1000H is an Industrial high power PoE Gigabit injector that can feed up to 60W over 4 pairs under 802.3at standard while 30W over 2 pairs. It equips a 4-pin DIP switch to choose Mode A (end point) or Mode B (mid span) for all different kinds of power devices.
Lantech IPOA-1000H is fully compliant with IEEE 802.3at/af standard. The 12V model designs a voltage booster where can boost input voltage from 12V to 48V or 54V for vehicle applications. The IPOA-1000H is the best PoE injector for outdoor IP CAM, PTZ, heater, wireless AP etc and is suitable for vehicle application (12V model)
verwandte Themen:
Lantech is launching new switch with passive PoE
The Lantech IES-0005T-PoE is a slim type 5-Port 10/100TX Industrial Switch with one PoE injector which supports PoE mode B (Pin assignment 4,5,7,8) at same voltage input and output(12V~48VDC). The IES-0005T-PoE is designed to meet the demands of industrial environments, comes packaged in a robust IP 30 housing and has been tested extensively to meet Industrial EMI and EMC standards. The ESD, surge, and power polarity reverse protections, making IES-0005T-PoE work well without interrupti...
Lantech IEC-0101FT
. 1 10/100TX to 100M-FX Slim Type Converter DNV Type Approved for Ships, Craft and Off-shore Platforms UL Class I Division II for Group A, B, C and D hazardous location Unique DIP switches to set the operation mode Built-in LLF and LFP technology Wide-range redundant power with polarity reverse protection The Lantech IEC-0101FT Industrial Converter is a slim type Industrial converter which has a unique DIP switch to adjust 100M duplex mode...
Lantech LPES-2224CA
. 24 10/100TX + 2 1000T/SFP combo with 24 PoE Injector Managed Switch Embedded 24 ports PoE inject function Embedded 200W AC power supply SNMP, Telnet, web, and CLI management Supports Spanning Tree and RSTP Lantech LPES-2224CA PoE switch is a highly integrated managed and PoE power feeding switch to deliver MTU, Transportation, VoIP, Surveillance applications. The 24 PoE interfaces provide flexible configuration options for the network. L...
Lantech 19″ Gigabit switch provides up to 6 fiber SFP slots
Lantech LGS-2624C is a 20-port 10/100/1000 Base-TX + 6 100 /1000M SFP L2 managed switches which supports full SNMP features, including QoS for 4 queues, 801.q VLAN, IPv6, IGMP snooping and query mode as well as SNTP and SMTP. The switch features advanced security function including SSH, SSL, RADIUS and TACACS+ authentication, PVE, ACLs as well as supports IP Source Guard to anti-fake DHCP server or illegal IP address to access the network. With advanced SNMP and security functio...
Lantech Industrial PoE Switches are Selected to Construct Bus System in Spain
The Lantech IPES-0008-4 is an 8-port 10/100TX unmanaged industrial switch with 4 PoE injectors and fully complies with IEEE 802.3af PoE standard. The model has been adopted to construct a bus system in Spain recently. The project installs one IPES-0008-4 in each bus, and the PoE switch then is connect to PoE standard IP cameras, a NVR, the ticket system, and a GPRS router. The real time information, including the video, then is transmitted to the remote control center. Lantech high qual...
Sie muessen eingeloggt sein um einen Kommentar zu schreiben Einloggen